Serving Tallinn and Harju County
Tallinn’s #1 car interior cleaning company
Auto Sisepuhastus applies ceramic coating to paintwork, glass, wheels and hard interior surfaces in Tallinn and Harju County. The coating makes these surfaces water repellent and less vulnerable to dust, tar and UV damage.
Before coating, we measure and record clear coat thickness on the job sheet. Those readings determine how much paint correction can safely be carried out first.
Book an appointment
We apply ceramic coating to four kinds of surface in our heated Mustamäe workshop. In May, damp birch pollen can stick to bodywork and leave marks in the clear coat after weeks in the sun. Coated paint is easier to rinse clean. By the end of 2025, we had coated the paintwork of 1,471 cars, the glass of 546 and the wheels of 317.
A silicon-based hydrophobic coating helps rain roll off the windscreen, rear window and mirrors instead of spreading across the glass.
On a coated windscreen, rainwater begins to slide off by itself at driving speeds from 60 km/h, reducing the need to use the wipers.
Interior treatment forms an invisible layer on fabric and leather to help resist spills, UV fading and everyday wear without changing how the material feels.
For families, it helps spilled juice or milk bead on the surface instead of soaking straight into the fabric. We recommend renewing the treatment once a year.
We apply ceramic coating to paintwork one panel at a time in a crosshatch pattern, then buff it with a clean microfibre cloth before it clouds over.
The technician has four minutes per panel before clouding starts, so excess product is worked in or removed before it dries.
Wheel ceramic coating withstands heat from the brake disc up to 250 °C, unlike ordinary wax.
The coating does not prevent brake dust, but helps protect the wheel surface from it. The dust can be rinsed off with water pressure without a brush.
The price depends on the surfaces coated, number of layers and how much paint correction the recorded clear coat readings safely allow. These starting prices are for a medium-sized passenger car.
| Service | Price |
|---|---|
| Ceramic coating for paintwork, one layer | from €370 |
| Ceramic coating for paintwork, two layers | from €600 |
| Ceramic coating for glass | from €82 |
| Ceramic coating for four wheels | from €160 |
| Interior protection, fabric or leather | from €150 |
The main factors affecting the price are:
Ceramic coating of the paintwork of a medium-sized passenger car, including measurement, washing, correction and application, takes 8 hours in the workshop. Adding glasses and rims to the same visit will extend the work by 2 hours.
In the 20-degree grey workshop, the layer becomes dry to the touch in 2 hours, and during the first 24 hours the car must not be exposed to rain, because dripping water leaves traces of raindrops on the unhardened layer.
The car must not be washed in a machine wash for 14 days, because the layer reaches its final hardness and hydrophobicity only in 7 days. Washing the brush before the deadline breaks the chemical bonding that is still in progress.
We answer enquiries within one hour on business days and can book a ceramic coating job within three business days. Application requires a workshop temperature above 15 °C and humidity below 60%, so we schedule winter jobs in our heated area. We coated 214 cars in 2025.
Car owner: Hendrik L., who had just bought a used sedan. Where did the car come from: Near Tallinn Song Square, Kadriorg.
1. Paint thickness on every panel: The bonnet, polished under the previous owner, measured 88 microns. We do not correct paint below 90 microns, so this car received coating without polishing.
2. Preparation: We used touchless foam washing, iron deposit removal and clay treatment, then wiped the clean surface with a 50% isopropanol solution. The paint thickness reading ruled out correction polishing.
3. Application: Both coats were applied one panel at a time with a chamois applicator in a cross pattern and each panel was rubbed to a gloss for 4 minutes.
4. Handover: the manufacturer's 48-month warranty and the pre-application hood reading, 88 microns, remained on Hendrik's job sheet.
Cost: ceramic coating for the paintwork, two layers: 1 × €600; pick-up and return within Tallinn: 1 × €24. The total amount of job sheet No. 16,803 including VAT is €624.
Project time in 2026: 8 hours of work. The layer was dry to the touch in 2 hours at 20 °C, the car was kept out of the rain for the first 24 hours and was returned to Kadriorg the following business morning. The owner was advised not to wash the car for 14 days, because the layer reaches its final hardness in 7 days.
What changed: the bonnet's 88-micron clear coat remained in full thickness, and the entire car received a 2.5-micron double-layer protection.
The coating comes on the clear coat only after the clear coat is read.
We measure the clear coat on each panel with a layer thickness gauge and note the readings on the job sheet. We immediately tell the client about the thinned clear coat of a previously corrected car, because the clear coat sample decides whether the surface can withstand one-step or multi-step polishing.
Before the coating, the car undergoes non-contact foam washing, removal of iron deposits and claying, so that the surface is completely clean. Then we polish the surface with the permitted number of stages and finally wipe with an isopropanol solution, which removes the polishing oils that prevent the binding of the coating.
The coating is applied one panel at a time and rubbed to a glossy finish before clouding. The manufacturer's 48-month warranty, its conditions and the pre-application measurement reading remain on the customer's job sheet.
The number of layers and the allowed correction is determined by the current state of the clear coat, not by desire.
One layer of ceramic coating is 1.5 microns thick and provides a basic hydrophobic effect, two layers totaling 2.5 microns in thickness give a deeper gloss and longer duration, as the second layer fills in the microscopic irregularities of the first layer. Of the 1,471 defense works completed by the end of 2025, 1,069 received one and 402 two layers.
The factory clear coat is 120 microns thick on a new car. A single step polishing with a single foam disc removes 2 microns of this and is suitable for light swirl marks, a multi-step polishing with a wool disc rotary polisher at 1500 rpm followed by a foam disc finish removes a total of 8 microns and is suitable for deeper scratches. We do not correct clear coats less than 90 microns thick, because the next step brings the colour of the base layer through.
After polishing, an oil residue remains on the surface, which prevents the molecules of the ceramic coating from chemically binding to the surface. We wipe the surface with a 50 percent isopropanol solution, which dissolves the oil without damaging the material of the coating itself, and only then apply the coating.
Ceramic coating is a silicon-based liquid that chemically bonds to the surface and forms a hard, hydrophobic layer. The layer does not replace paint or clear coat, but covers it with an additional protective surface.
The ceramic coating warranty is the manufacturer's and lasts 48 months. The guarantee is based on the reading of the layer thickness gauge before application, which remains on the customer's job sheet.
The car must not be washed in a car wash for 14 days after application, as the layer reaches its final hardness and hydrophobicity in 7 days. During the first 24 hours, the car must also be protected from rain.
No, the car must be under the roof or covered during the first 24 hours, because dripping rainwater will leave marks on the unhardened layer. After this period, light rain will no longer interfere with the curing of the layer.
No, the need for polishing is determined by the reading of the layer thickness gauge. We apply a coating to a thin clear coat without correction, because additional polishing makes the clear coat dangerously thin. From 2016 to the end of 2025, 1,302 panels remained uncorrected due to readings below 90 microns.
Ceramic coating of the paintwork with one layer starts from 370 euros, with two layers from 600 euros. Ceramic glass protection starts at 82 euros and rim protection at 160 euros.
No, the coating does not replace the clear coat or stop the physical stone impact: it protects the clear coat from chemical etching and prevents dirt from sticking to the surface. Deep scratches caused by stones require separate polishing or clear coat repair.
We will respond to the request within one hour on business days, and a car waiting for a coating can be booked into the Mustamäe workshop within three business days. In winter, we plan application in the heated workshop, as the layer needs a temperature above 15 degrees to start binding.
Send a request for ceramic coating using the form below or book an appointment by phone +372 XXXX XXXX. Describe the car model and whether you want protection for the paintwork, glass, rims or interior surfaces, and the initial price along with the first available appointment at the Mustamäe workshop will be provided in our reply.